The Double Uni Knot is just a modification of the Single Uni Knot, and a typical knot used by most anglers. It is actually ideal when applied in tying two lines of related or the same diameter, but may also be made use of for matching two different size lines. The resulting efficiency may perhaps be diminished, so choosing an Albright Knot when joining lines of different diameters may perhaps be a better decision.
This knot is most commonly used to tie the primary line to a leader, or for tying backing to a main line. A lot of people take into account that it is simpler to use than a Blood Knot, and it is a lot more versatile.
Here’s how to tie a Double Uni Knot:
1. First you will lay the two lines side-by-side in opposing directions with a minimum of 12” in between tag ends. This will make a 12” section of double line.
2. Take 1 of the tag ends and make a big loop back towards the middle of the 12” section and wrap it around the other line.
3. Wrap the tag end around the double line and by means of the loop 5 times. This needs to appear like a tiny coil having a big loop coming out of it.
4. Pull the tag end via the big loop and make the knot tight. Repeat exactly the same procedure using the end tag of the other line so that you’ve two identical knots along the 12 inches of double line that you simply laid out initially. Then pull the long ends of both of the lines to tighten the knots and make them come together in the middle.
5. Basically cut off the excess line, and you have the finished Knot.
It’s crucial to note that the bigger the difference in the diameter between the lines which are being tied with the knot, the weaker the knot will become. Although it can be utilized for just about anything, the knot works the best for lines which are comparable in diameter.
The lighter the line, increase the number of wraps to improve its strength. Use common sense and try not to use more wraps than necessary. 3 wraps are usually sufficient for heavier lines, but thinner ones require a minimum of five. It is not suggested to go above seven wraps when 5 is often the most you will need.
When it is finished, it’s going to easily slide through a fishing rod. It truly is extremely strong and may hold 70 to 80% of the line weight. Many people basically use similar knots in jewelry creating due to its strength and versatility. It is easy to use and is usually a favored knot for lots of anglers.
Its thin overall diameter assists with having less hang-ups than other comparable knots, helping the line flow easily via the guides. Of course, you don’t want any problems in the middle of a catch, so the fluid nature of the Double Uni Knot makes it one of the top alternatives.